OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3572

Stack Outlet Coolant Temperature Sensor 2 Circuit

U3572 is logged when the second coolant temperature sensor at the stack outlet has a wiring or signal problem. No maker explains in public why two sensors share this spot; mutual checking is the obvious reason. A Toyota patent for systems with several stacks shows one way: outlet temperature is estimated from inlet temperature and stack output, and an outlet sensor whose reading departs from that estimate is reported as faulty. GM compares the outlet value with an expected figure to spot a failed coolant pump and may then lower stack output. Hyundai campaign 21-01-045H-1 for the Nexo shows that a stack coolant fault (pump code P1D3D94) lights the check engine lamp. No maker documents U3572 publicly. With sensor 1 still valid a warning may be all; with both lost, power will be cut. Sensor 1 is U3571.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 72

Possible causes

  • Open, short or corrosion in wiring or connector of outlet sensor 2 high
  • Outlet temperature sensor 2 faulty internally medium
  • Shared sensor ground faulty (often with U3571 at the same time) low

Symptoms

  • Fuel cell system warning, MIL on
  • Little or no change in driving as long as sensor 1 is valid
  • Reduced power if both outlet sensors are affected

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U3572

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication