OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3569

Anode Multifunction Valve

With U3569 the multifunction valve can be driven but does not do what it is told: it stays shut, leaks or reacts too slowly. A solenoid of this kind usually lacks position feedback, so its state is inferred. For an integrated drain and purge valve Hyundai lifts anode pressure a fixed amount over ambient while no current is drawn and the air path is closed, opens the valve and checks after the expected drain time plus a settling period whether pressure has dropped to ambient; if not, the valve counts as stuck closed. GM reads the injector duty instead, which climbs once gas rather than water passes. Stuck shut, the valve lets water flood the anode and nitrogen dilute the hydrogen; stuck open, hydrogen escapes. No public source names U3569. Typical results are a warning, less power or a shutdown.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 69

Possible causes

  • Valve frozen shut after parking in frost medium
  • Valve sticking or leaking from deposits or worn seat medium
  • Water level sensor of the separator reads wrong, valve itself fine low
  • Control software needs an update low

Symptoms

  • Fuel cell system warning, MIL on
  • Reduced power, uneven fuel cell output
  • Start refused or shutdown, mainly after frost
  • Higher hydrogen consumption

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U3569

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication