OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3568

Anode Multifunction Valve Control Circuit

U3568 flags trouble in the electrical drive of the anode multifunction valve: an open wire, a short against ground or battery voltage, or a failed output stage. The code title does not say which duties the valve combines; known designs merge draining water and purging nitrogen in one solenoid below the anode water separator. GM routes such a combined valve into the cathode inlet so that escaping hydrogen reacts on the catalyst, and Hyundai calls its version an integrated discharge valve. If the controller cannot switch it, the anode loses both its water outlet and its nitrogen outlet; in Hyundai's patent the system stops when no gas leaves the valve. No manufacturer documents U3568 publicly. A fuel cell warning with lost drive power is the likely result. Mechanical misbehaviour of the valve is U3569.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 68

Possible causes

  • Open, short or corrosion in wiring or connector of the valve (wet area below the stack) high
  • Solenoid coil of the valve open or shorted medium
  • Driver stage of the fuel cell control unit faulty low

Symptoms

  • Fuel cell system warning, MIL on
  • Power dropping off the longer the drive lasts
  • Fuel cell system shuts down or does not start

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U3568

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication