U3553
Hydrogen Tank B Valve Control Circuit
U3553 means the controller sees a fault in the drive circuit of the solenoid valve on tank B, such as an open coil, a short to ground or supply, or an output that does not follow its command. Hyundai shows in a patent how such valves can be checked: one current sensor reads the operating current of several tank solenoids; if it falls below a reference, the controller switches the PWM duty from 100 to 90 % and looks whether the fed-back duty appears inverted. If not, the valve is judged faulty. In the workshop that means measuring coil resistance and following the harness from tank to controller. No maker documents U3553. Until repaired, tank B stays closed; U3550 and U3556 are the same fault on tanks A and C.
Possible causes
- Damaged wiring or corroded connector to the tank B valve high
- Solenoid coil open or shorted medium
- Output stage of the control unit faulty low
Symptoms
- Hydrogen system warning
- Range reduced because tank B is not used
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U3553
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.