U354F
Hydrogen Tank C Temperature Sensor 2 Circuit
U354F is set when the circuit of the second temperature sensor in tank C fails. During refuelling the car hands tank data to the station; Toyota describes infrared links between the tank temperature sensors, nozzle and dispenser that set the flow so the gas does not overheat. In a published test series the fill was stopped as soon as either of two tank sensors showed 85 °C, which explains why a missing channel matters: the controller has to fill more cautiously or quit early. FMVSS 308 likewise ties a slower pressure ramp to gas above 85 °C. No maker documents U354F. Expect a hydrogen system warning and refuelling that takes longer or ends short of full, which in turn trims range. The paired sensor is U354E.
Possible causes
- Open or short in the wiring of sensor 2 at tank C high
- Temperature sensor 2 of tank C failed medium
- Evaluation software needing a manufacturer update low
Symptoms
- Refuelling takes longer or stops before full
- Hydrogen system warning
- Reduced range after refuelling
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U354F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.