U354D
Hydrogen Tank B Temperature Sensor 2 Circuit
U354D marks an electrical fault on the second temperature sensor of tank B. Apart from fill control, tank temperature is needed to convert pressure into fuel quantity, because cold gas at a given pressure holds more hydrogen than warm gas. Sensors and wiring sit at the tank under the floor, often inside the on-tank valve. Hyundai's venting bulletin 20-FL-008H-1 for the Nexo has the underbody covers removed to reach the tank valves, requires tank pressure below 500 psi before work on hydrogen parts and full venting before welding or open flame within 18 inches. A sensor fault on the tank can therefore become a job involving defuelling. No maker publishes U354D. Its partner on the same tank is U354C.
Possible causes
- Moisture or damage at the underbody connector of tank B high
- Temperature sensor 2 of tank B failed medium
- Harness chafed after underbody or tank work low
Symptoms
- Hydrogen system warning
- Fuel gauge less accurate
- Refuelling ends early
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U354D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.