U354B
Hydrogen Tank A Temperature Sensor 2 Circuit
U354B is the circuit code for the second temperature sensor in tank A. One probe cannot capture a long tank during a fast fill: in tests published in the HySafe journal, sensors in on-tank valves at both ends of a Type IV tank finished a fill around 30 °C apart, and the authors concluded that even two positions miss the hottest zone. A second sensor thus gives the controller a cross-check and a second view of the gas. Honda's 2019 dealer notice for the Clarity Fuel Cell describes the flip side: a false reading between two tank sensors kept the tank from being filled completely. No maker documents U354B publicly. With sensor 2 lost, expect a warning and cautious, perhaps incomplete fills; sensor 1 of the same tank is U354A.
Possible causes
- Wiring or connector fault at the far tank end high
- Second temperature sensor of tank A failed medium
- Evaluation software misjudging the sensor pair low
Symptoms
- Tank cannot be filled completely
- Hydrogen system warning
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U354B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.