OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U354A

Hydrogen Tank A Temperature Sensor 1 Circuit

U354A reports an electrical fault on the first temperature sensor of hydrogen tank A. Tank sensors matter most while refuelling: compression heats the gas, and FMVSS 308 slows the pressure ramp once the gas inside passes 85 °C; on the Mirai the tank temperature is passed to the dispenser by infrared. No maker publishes U354A, but Honda shows how such faults appear on the 2017 Clarity Fuel Cell under its own codes P1F76 (main tank) and P1F77 (sub tank): they set during fuelling, and because the sensor sits inside the tank, the first remedy in Tech Line article ATS 170903 was a new tank. Bulletin 19-001 later blamed many cases on outdated software in the fuel cell communication unit. Sensor 2 of the same tank is U354B.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 4A

Possible causes

  • Outdated software in the unit that evaluates the tank sensors medium
  • Temperature sensor inside the tank failed (often only as tank assembly) medium
  • Open or short in the sensor wiring or connector at the tank medium

Symptoms

  • Code sets while refuelling
  • Hydrogen system warning
  • Refuelling slower or ends before the tank is full

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U354A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication