U353E
High Voltage System Interlock Circuit N Performance
U353E marks loop N as implausible. Such a verdict can stem from electrical interference rather than from the loop wiring. Tesla bulletin SB-25-17-005 for 2023 and 2024 Model Y cars describes the centre high mounted stop lamp disturbing the supply line of the high-voltage controller, which set HVIL alerts on an intact loop; the fix is a ferrite clipped around the thickest tan wire of that harness branch. A fault that coincides with braking or with other loads switching on suggests similar coupling on loop N. No maker documents U353E. Wiring checks then find nothing, and the warning may clear by itself.
Possible causes
- Interference from another load coupling into the supply of the monitoring controller medium
- Loose contact in a loop N connector medium
- Ferrite or shielding missing after harness repair low
- Evaluation software of the controller too sensitive low
Symptoms
- High-voltage warning that appears briefly, sometimes when braking
- No fault found on loop resistance checks
- Occasional refusal to become ready
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U353E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.