U353C
High Voltage System Interlock Circuit M High
U353C indicates that loop M exceeds its upper threshold. A loop built from known resistances can be checked point by point. In Tesla's Model S tech note the battery management sends a constant 20 mA through four resistance stages of 60 ohms, 240 ohms in total, so about 4.8 V appears at the start and the value falls to 3.6, 2.4 and 1.2 V at the following connectors. Back-probing each point and comparing it with these steps shows in which section extra resistance or foreign voltage sits; resistance to ground with the loop off runs in matching 60-ohm steps. A wiring diagram with such reference values makes loop M quick to trace. No maker documents U353C itself.
Possible causes
- Corroded or loose contact adding resistance in one section of loop M high
- Loop M wire in contact with a 12 V supply medium
- High-voltage component with internal loop resistance out of specification low
Symptoms
- Vehicle does not become ready
- High-voltage warning returns after clearing
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U353C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.