U353A
High Voltage System Interlock Circuit M Performance
U353A flags loop M as questionable rather than plainly open or shorted. Redundant monitoring can produce exactly that state. NIO patented an interlock fed by two signal generators whose pulse trains overlap on one line; with duty ratios A and B the detector expects a combined average of A plus B minus their product. If only one part arrives, the system can keep the contactors closed and name the generator whose share is missing as a fault candidate, though the real cause may sit outside it. The aim is to avoid needless shutdowns caused by a failing monitoring part. Under such logic a performance code may be logged while the vehicle still drives. No maker documents U353A.
Possible causes
- One of the loop M signal sources weak or failed medium
- Loose contact in a loop M connector distorting the signal medium
- Detection circuit for loop M faulty low
Symptoms
- Warning lamp while the vehicle keeps driving
- Occasional loss of high voltage if the second channel also degrades
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U353A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.