U3536
High Voltage System Interlock Circuit L Performance
U3536 means loop L delivers values the controller considers implausible without a clear limit being crossed. Shaky contacts are a typical reason. Tesla's Model S HVIL note has technicians wiggle each plug while a second person watches the live loop voltage, and stresses that a weak spot may make the value drift long before it is bad enough to set a fault; pin drag tests then reveal loose terminal tension. Multi-Contact markets a dedicated short-contact module tested for shock and vibration to DIN 50467, because ordinary shortened contacts can end up wrongly placed. No maker documents U3536. Expect brief shutdowns, often on bad roads.
Possible causes
- Terminal in a loop L connector with too little contact force high
- Loop L connector without proper strain relief, moving with vibration medium
- Signal input of the evaluating controller faulty low
Symptoms
- Short high-voltage dropouts while driving, especially over bumps
- Warning disappears after a restart
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U3536
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.