OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3535

High Voltage System Interlock Circuit L

U3535 is the umbrella code for interlock circuit L, the eleventh loop. Large vehicles carry many guarded compartments. On New Flyer battery buses the energy storage units sit on the roof at front, centre and rear, and each access door is watched by an interlock limit switch. A service instruction from the bus maker, filed with NHTSA, swaps the switch bracket for one with a stop and bonds a striker plate to the door so the switch is pressed reliably; the same procedure turns a separate HV interlock switch off for lockout. A misadjusted door switch, or a lockout switch not turned back on, can open a loop such as L. Which compartments belong to it is not published.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 35

Possible causes

  • Door or lid limit switch on loop L misadjusted or not actuated high
  • Manual high-voltage interlock or lockout switch left off after service medium
  • Connector in loop L not fully latched medium
  • Controller monitoring loop L faulty low

Symptoms

  • Vehicle or one energy storage unit unavailable after maintenance
  • High-voltage system warning on the dashboard
  • Fault linked to opening or closing a compartment

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U3535

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication