U352E
High Voltage System Interlock Circuit J Performance
U352E reports an implausible result from loop J. Interlocks also guard auxiliary drives outside the traction system. Copeland patented a contactless version for the inverter of a trailer refrigeration unit, which may be fed from a 460 V generator through a rectifier at about 650 V DC: a magnet on each terminal cover faces a Hall sensor in the housing, and the drive releases voltage only while that field is sensed. The patent wants the detection range small, so a cover sitting slightly askew, a deformed gasket or a loosened magnet screw can leave the sensor near its switching point and let the reading flicker. No maker documents U352E. The drive on loop J may cut out at random.
Possible causes
- Cover with interlock sensing seated unevenly or gasket deformed medium
- Loose contact in a loop J connector medium
- Sensing element or its actuating magnet loose or damaged low
- Signal input of the evaluating controller faulty low
Symptoms
- High-voltage consumer on loop J switching off intermittently
- Fault more frequent on rough roads or after work on covers
- High-voltage system warning that comes and goes
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U352E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.