U3529
High Voltage System Interlock Circuit H
U3529 marks a fault on circuit H, the eighth interlock loop, without a more specific result. Texas Instruments distinguishes one central loop running through all high-voltage parts from individual loops inside each subsystem that confirm its own assembly. Eight separate loops are realistic mainly for trucks, buses and machines with several packs and distribution boxes, such as Volvo's electric-road trucks with at least two HV buses or Caterpillar's multi-pack machines; in passenger cars a fourth to eighth loop is hardly to be expected. No manufacturer documents U3529. On a car, compare codes in other units before assuming a wiring fault.
Possible causes
- Connector or disconnect on loop H open high
- Loop H wiring damaged on chassis or between packs medium
- Code logged by a controller with faulty software rather than a real loop H fault low
Symptoms
- One HV branch or pack unavailable, or no ready mode
- Warning about the high-voltage system
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U3529
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.