U3524
High Voltage System Interlock Circuit F High
U3524 indicates a level on loop F above its upper threshold. Pulsed test schemes recognise this easily: if the loop is driven with a fixed square wave, as in Corun's 100 Hz battery design, a wire stuck at 12 V returns a flat level without any edges, which no intact connection could produce. Texas Instruments rates its interlock reference design to survive a direct connection to the 12 V battery, and it offers a third, high-impedance output state for diagnosis. No manufacturer publishes U3524. Look for chafing against fused 12 V wires and for low-voltage plugs in which a loop pin sits right beside a supply pin.
Possible causes
- Loop F wire chafed against a fused 12 V wire high
- Loop pin bridged to a neighbouring supply pin by corrosion or a bent terminal medium
- Source driver for loop F no longer switches off low
Symptoms
- High-voltage system remains off, vehicle not ready
- Code returns at once after clearing
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U3524
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.