U3522
High Voltage System Interlock Circuit F Performance
U3522 is set when loop F behaves inconsistently, for instance when redundant evaluation channels reach different verdicts or the signal timing is off. Such checks exist because the interlock belongs to a safety function: Samsung SDI notes that it then needs an ASIL rating and failure-rate figures for its parts, so hidden faults in the monitoring path have to be caught, not just an open loop. CARB counts the interlock among safety-only systems, which is why this code concerns electrical safety rather than emissions and why lamp behaviour differs between makers. No manufacturer publishes U3522. Expect sporadic refusals to become ready.
Possible causes
- Redundant measuring channels for loop F disagree because of a sensing fault medium
- Intermittent contact in a loop F connector medium
- Internal fault of the evaluating controller low
Symptoms
- Ready mode occasionally refused, then available again
- High-voltage warning that comes and goes
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U3522
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.