U3518
High Voltage System Interlock Circuit C High
U3518 is stored when loop C reads above its upper limit, usually a loop wire shorted to 12 V, to the wire of another loop in a shared connector, or a source stage that no longer switches off. Volvo's two-loop patent couples loops only through a galvanically isolated relay, so foreign voltage from one loop is not meant to reach another; where wires of different loops share a connector, damage can still bridge them. Ford's patent stores a code and switches on its Service Soon lamp once an interlock circuit is shorted high, and Texas Instruments shows that the loop current then stops following the commanded pattern. No maker documents U3518. The HV system stays off; inspect connectors that carry interlock pins of several loops first.
Possible causes
- Interlock wire of loop C shorted to 12 V high
- Loop C bridged to another loop's wire in a shared connector medium
- Interlock source for loop C stuck on in the module low
Symptoms
- No ready mode despite all HV connectors being in place
- Service or HV warning lamp lit
- High codes for more than one interlock loop
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U3518
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.