U3515
High Voltage System Interlock Circuit C
U3515 is the general fault of a third interlock loop, circuit C. Such a loop exists where one or two are not enough: Caterpillar's patent for battery machines forms a separate interlock circuit from each battery group with its disconnect and contactor pair, and Samsung SDI mentions designs with more than two independent loops for parts inside the pack. Volvo couples two loops through an isolated relay so that a fault in one opens the other, which is why codes for several loops can be logged together. Which component a manufacturer wires into loop C is not documented publicly for any vehicle. U3515 applies when loop C fails without a more specific low, high or performance result; HV power remains off until the loop is closed again.
Possible causes
- Connector or cover belonging to loop C opened during work and not refitted correctly high
- Interlock harness of loop C damaged medium
- Fault in a coupled loop opening loop C as well medium
- Monitoring module unable to drive or read loop C low
Symptoms
- No ready mode, HV system switched off
- Interlock codes for more than one loop stored together
- Charging blocked
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U3515
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.