OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U350D

Control Module Cooling Fan Circuit Low

U350D is set when the voltage or current feedback in a control module's fan circuit sits below the window the module expects. Usually the fan supply or control wire touches ground, or the motor itself has shorted turns, so the output stage limits current or switches off and the fan stands still; a blown fan fuse produces the same picture. Electronics with a dedicated fan exist, for example the charger of the 2021 Toyota RAV4 Prime with its fan speed sensor (T-SB-0021-21), and CARB demands that electrical outputs cooling inverters and batteries be checked for circuit faults. No manufacturer publishes U350D. Once warm, the module will most likely protect itself by lowering its output. An open circuit is U350C, a short to voltage U350E.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 0D

Possible causes

  • Fan supply or control wire chafed through to ground high
  • Fan motor with shorted windings drawing excess current medium
  • Fan fuse blown as a result of the short medium
  • Output stage in the module pulling the line low low

Symptoms

  • Module fan does not run
  • Reduced function or shutdown of the module when hot
  • Blown fan fuse

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U350D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication