OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U350C

Control Module Cooling Fan Circuit/Open

U350C reports that the fan built into or attached to a control module draws no current, or its circuit is open, at the moment the module switches it on. Some electronics carry their own blower: on the 2021 Toyota RAV4 Prime the plug-in charger has a fan with a speed sensor (bulletin T-SB-0021-21, code P1CE931), and the central infotainment unit of the Karma Revero has one under a shroud (TB-24-94-01). For electrical parts that cool inverters and traction batteries, CARB requires circuit and function monitoring. No maker documents U350C itself. With the fan dead, the module heats up and may cut its own output, charge more slowly or shut down. Shorts are split off into U350D/U350E; U350F covers a fan that is wired correctly but runs wrong.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 0C

Possible causes

  • Fan motor winding or brushes open high
  • Fan plug loose or not latched after the module was removed medium
  • Broken fan supply or control wire medium
  • Fan output stage inside the module failed open low

Symptoms

  • Module fan silent when it should run
  • Module overheats, reduces output, charges slower or restarts
  • Temperature warning or function message for the affected module

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U350C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication