U350A
Control Module Input Power C Circuit High
U350A is the overvoltage code for supply C. GM's electric brake booster (2016–2019 hybrid tables) logs it when voltage sensor 2 on the motor driver supply exceeds 19.8 V for 90 s at speeds above 4 mph, Type A, so a single failing trip lights the MIL. The limit is higher than the 16 to 18 V thresholds used for feeds A and B because the motor stage tolerates more, yet a lasting excess is treated as serious since it threatens the power transistors. The pass condition is a straight drive over 3.1 miles or more. Such values rarely arise in a healthy 12 V system: think of a failed generator regulator or DC/DC converter, jump-starting from a 24 V source, or, with normal battery voltage, an internal sensing error.
Possible causes
- Generator regulator or DC/DC converter overcharging medium
- Jump start from a 24 V source medium
- Faulty measurement of feed C inside the module medium
Symptoms
- MIL and brake warning on the first trip
- Brake assist reduced or switched off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U350A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.