U3509
Control Module Input Power C Circuit Low
U3509 says supply C is too low. In GM's 2016–2019 hybrid OBD tables the electric brake booster sets it when voltage sensor 2, which watches the motor driver supply, reads below 6 V for 90 s while the car travels faster than 4 mph. Unlike the A and B low codes, which are Special Type C without MIL, this one is Type A, lighting the MIL after one failing trip, because the booster motor cannot build assist without this feed. Passing requires a straight drive of at least 3.1 miles. Less than 6 V for that long almost always means an open fuse or wire, a failed connector or a deeply discharged battery rather than a brief dip. Drivers may see a brake warning and feel a harder pedal; check the motor fuse and its ground first.
Possible causes
- Fuse of the motor supply open high
- Broken wire or failed connector in feed C medium
- Deeply discharged 12 V battery medium
- Internal measurement of feed C faulty low
Symptoms
- MIL and brake warning on the first trip
- Harder brake pedal through missing assist
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U3509
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.