OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3508

Control Module Input Power C Circuit Range/Performance

U3508 checks the plausibility of a third supply input, C. Only modules with large or separately protected loads have three feeds; in GM's electric brake booster (2016–2019 hybrid tables) C is the motor driver feed, measured by voltage sensor 2 and compared with feed B through U3019 (ratio outside 0.766 to 1.321). U3508 would apply if C is present but its value does not suit the operating state, for instance staying high while the motor draws current or departing from battery voltage, without crossing a hard limit. No manufacturer documents U3508 publicly; GM uses only the Low and High codes for C. Check the motor feed and its ground under load and look for related U3019 or U3013.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 08

Possible causes

  • Resistance in the motor supply path of feed C medium
  • Poor ground of the power stage medium
  • Drift of the internal voltage divider low

Symptoms

  • Reduced function of the motor-driven system
  • Correlation codes between feeds stored as well

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U3508

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication