U3507
Control Module Input Power B Circuit Intermittent/Erratic
U3507 covers an unsteady supply B: the voltage is mostly in range but drops out or jumps for short moments. Since B often powers stages such as motors or valves, the dropouts typically appear when these draw current, for instance while braking or steering. GM's brake booster tables show that the module judges B over short and long windows (0.2 s up to 90 s); a fault that merely flickers fits neither the low nor the high code and counts as erratic. No manufacturer documents U3507 publicly. Suspect loose crimp contacts, worn fuse holders, corroded grounds and chafed wires, and test under load with a recording meter or scope. If U3505 or U3018 are stored as well, the feed has probably dropped out completely at times.
Possible causes
- Loose crimp or worn fuse holder in feed B high
- Corroded ground point of the module medium
- Chafed wire with intermittent contact medium
Symptoms
- Brief function dropouts when power stages switch on
- Code returns sporadically and is hard to reproduce
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U3507
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.