OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3506

Control Module Input Power B Circuit High

U3506 reports overvoltage on supply input B. In GM's electric brake booster (2016–2019 hybrid OBD tables) three checks feed this code: battery voltage of the booster circuit above 17 V for 90 s, the supply of the internal motor driver above 18 V for 1.1 s, and battery voltage above 16.5 V for 1.1 s, at which booster performance is cut back. All are Type B, MIL after two trips; passing takes 90 s with ignition on. The graded limits reveal the idea: brief excursions are tolerated, lasting ones or those that put the power stage at risk are not. Check the charging voltage at idle with loads switched on first, then external chargers, jump starters and loose battery terminals that produce voltage spikes.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 06

Possible causes

  • Charging voltage too high from regulator or DC/DC converter high
  • Jump starter or charger delivering excessive voltage medium
  • Loose battery terminal causing spikes medium
  • Faulty measurement of feed B in the module low

Symptoms

  • MIL after two trips
  • Reduced assist of the supplied power stage
  • Overvoltage codes in further modules

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U3506

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication