OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3504

Control Module Input Power B Circuit Range/Performance

U3504 checks the plausibility of the second supply input, B. Modules with high-power stages often split their supply: in GM's electric brake booster tables B is the battery feed of the booster circuit (voltage sensor 1), checked separately against low and high limits and compared with feed C. U3504 applies when B is present but implausible, for example disagreeing with the logic supply or failing to follow battery voltage under load, without crossing a hard limit. No manufacturer documents U3504 publicly. Because B often feeds valves or motors, a high resistance tends to show only while current flows, as a drop that is invisible at rest. Measure the voltage drop across fuse, connector and ground under load and check whether U3018 or U3505 are stored as well.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number5 / 04

Possible causes

  • Resistance in fuse, connector or ground of feed B under load medium
  • Feed B supplied from a different source than expected medium
  • Drifting measurement of feed B inside the module low

Symptoms

  • Power stage functions weak or switched off under load
  • Code mainly when motors or valves are active

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U3504

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication