U3500
Control Module Input Power A Circuit Range/Performance
U3500 says that supply input A of a module is present but its voltage is implausible, for example outside the window expected for the current power mode or contradicting other measurements, without clearly passing a lower or upper limit. It thus sits between U3006, which reports a missing or open feed, and the hard limit codes U3501 and U3502. Which pin is A is up to the manufacturer; in GM's electric brake booster tables (2016–2019 hybrid) A is the module's own logic and CAN supply, watched for under 7.5 V and over 16 V, but GM uses only the Low and High codes there. No manufacturer documents U3500 publicly. Typical causes are a high-resistance contact that sags under load, a poor ground or a drifting internal measurement.
Possible causes
- High-resistance terminal or fuse contact on feed A medium
- Poor module ground shifting the measured supply medium
- Drifting voltage measurement inside the module low
Symptoms
- Functions of the module dropping out or behaving inconsistently
- Code returns mainly under electrical load
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U3500
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.