U3033
Control Module Security Certificate Missing/Invalid
U3033 reports that a module's own security certificate is absent or fails validation, so the unit cannot prove its identity in signed or encrypted exchanges. Stellantis uses the code in the security gateway (SGW) and in connected radios. For 2020 Durango and Pacifica radios, case S2008000164 explains that the certificate is fetched once the car is online and that a stored entry may need as many as 40 key cycles before it disappears; no part is to be replaced. Later bulletins for Ram, Jeep Wagoneer, Grand Cherokee and Dodge Charger (08-322-25, 08-173-26, 9100701) name U3033-00/-01 in the SGW, state that it leaves the MIL off and fix it by reflashing the SGW when the over-the-air update failed. Bulletin 9100386 adds checks of connectivity and the Ethernet network and reloading the certificate store.
Possible causes
- Certificate not yet downloaded because the vehicle had no connectivity high
- Gateway software setting the code erroneously, fixed by reflash high
- Over-the-air update not completed medium
- Certificate store empty or holding a wrong certificate low
Symptoms
- Code active or stored and cannot be cleared, usually without MIL
- Security gateway not answering the diagnostic tester
- Message asking for an over-the-air update or a service visit
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U3033
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.