OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3031

Ignition Output Off

U3031 relates to an output whose task is to announce the off state, for example a discrete line that tells other units they may shut down, or the off branch of a power-mode output. Shutdown in many vehicles hinges on such a signal: in Ford's patent US5945745A, modules work normally while an ignition signal is present and fall back to a sleep mode with minimal current draw once it disappears, and GM's 2012 pickups allow the BCM to sleep only when none of its outputs is commanded. If the generating module finds this off output in the wrong state, it records U3031. Stuck in the not-off state, receivers stay awake and drain the battery; signalling off while driving could shut functions down on the move. No manufacturer documents U3031 publicly, so where this output sits has to be taken from the wiring diagram of the vehicle.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number– / 31

Possible causes

  • Faulty output stage in the module that generates the off signal medium
  • Off-signal wire open or shorted to ground or voltage medium
  • Corroded or loose pin at the sending or receiving module low
  • Module software setting the off output at the wrong moment low

Symptoms

  • Battery drained because modules do not go to sleep
  • Functions switching off unexpectedly with the vehicle on

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U3031

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication