U302F
Ignition Output Accessory
U302F is logged by the module that switches the accessory feed for audio, sockets or windows when that feed is out of step with its own command. Two normal behaviours have to be ruled out first. Keyless systems cut accessory power during cranking: in Tokai Rika's patent US7254466B2 the power supply unit releases the accessory relay when start is requested and re-energizes it only once the engine controller reports that combustion has begun. GM's 2012 pickups, on the other hand, keep accessory voltage on after key-off through a relay inside the BCM for roughly 10 minutes, unless a door is opened. Outside those windows, a live feed in a locked car suggests a welded relay or a driver stuck on, and a dead feed in accessory an open relay, fuse or wire. No manufacturer documents U302F publicly.
Possible causes
- Accessory relay welded or its driver stuck on medium
- Accessory relay not pulling in medium
- Blown accessory fuse or open feed wire medium
- Retrofitted equipment overloading or backfeeding the accessory feed low
Symptoms
- Radio, sockets or windows dead in accessory mode
- Accessories still on long after locking, battery drained
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for U302F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.