OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U302A

Control Module A Disable Feedback Circuit High

U302A means the readback from module A's disable path is stuck above its valid range, for example through a short to a supply wire. The risk is a false all-clear or a false alarm, depending on which level stands for disabled. In a test sequence like the six-step shutoff check of FCA patent US10676100B2, a feedback that never drops will fail the steps where a shutdown is commanded, and the controller must assume the shutdown path does not work. FCA notes that such a result would eventually need a fault flag, and that blocking the vehicle outright could strand the driver, so it proposes rerouting the signal through another processor to keep availability. No manufacturer documents U302A publicly. Check the readback wire for contact with powered circuits and the connectors for moisture.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number– / 2A

Possible causes

  • Feedback wire shorted to a battery or supply wire high
  • Corrosion bridging the readback pin to a neighbouring supply pin medium
  • Module A driving its feedback output permanently high low

Symptoms

  • System warning and function of module A unavailable
  • In hybrids, possibly no ready mode or reduced drive power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U302A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication