U3022
Ignition Input Accessory/Off
U3022 is the last of the ignition input codes and, by its name, covers a line or line state that belongs to Accessory and Off together, i.e. to all positions in which the engine is not meant to run. GM's 2012 pickup wiring manual has a comparable case: its coded Off/Run/Crank circuit shows one common state for key out and for accessory, separate from key in, run and crank. A module that sees this accessory/off state while the network reports run or crank, or the opposite with the vehicle parked, logs U3022. No manufacturer documents U3022 publicly. In practice the code is less about a single dead wire than about two signals disagreeing, so stored codes for U300C, U300F or U3011 in the same module are useful hints as to which circuit is wrong.
Possible causes
- Contact resistance in the ignition switch giving an in-between level medium
- Input wire open, shorted or backfed medium
- Body control module broadcasting a wrong power mode low
Symptoms
- Accessory functions behaving wrongly for the key position
- Stored together with other ignition input codes in the same module
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U3022
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.