U3021
Control Module Wake-up Circuit B Performance
U3021 is the plausibility code for wake-up line B: the wire is neither open nor shorted, but the wake signal arrives at the wrong time or does not match what other inputs say. No manufacturer documents U3021 publicly. The closest published logic is Ford's U301D for line A in the 2019 Fusion Energi battery module, which fails when the charge wake-up is still low although the charger output voltage is already in the window for closing the contactors. Chrysler's powertrain counterpart P06E4, wake-up circuit performance, appears in 2024 Jeep Wrangler 4xe bulletins (e.g. 21-017-24) that cure it with new module software. Both cases point the same way: a performance fault on a wake line is often a timing question between two modules and is more often solved by a software update than by new wiring.
Possible causes
- Software in sender or receiver judging the wake timing wrongly high
- Source on line B raising or dropping its signal late medium
- Contact resistance on line B slowing the level change low
Symptoms
- Warning lamp or message after a wake event, e.g. after charging
- Function works, but the code returns sporadically
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U3021
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.