OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U301E

Control Module Wake-up Circuit B/Open

U301E is the open-circuit code for a second wake-up line, B, on modules that can be roused by more than one source, for example by a door or key event and separately by a charge or timer signal. Ford's patent US5945745A explains why such paths exist at all: a module may sit in a low-current state with the ignition off and still has to answer certain demands, such as panel lighting when the headlamps are switched on. No manufacturer documents U301E publicly; Ford's 2019 hybrid OBD summary shows only the A-side logic of a charge wake-up line. When only line B is open, the module still wakes through A and the bus but ignores the source wired to B, so the fault often shows as one specific function failing to start. If A and B are logged together, check the common sending module or a shared splice first.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number– / 1E

Possible causes

  • Broken wake-up wire B or loose pin high
  • Fault at a splice or sender shared with line A medium
  • Source wired to line B not driving its output medium

Symptoms

  • One wake-dependent function, e.g. timed or remote action, does not start
  • Module otherwise works normally once awake

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U301E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication