OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3018

Control Module Input Power Circuit A/B Correlation

Where a module has two separate battery feeds, U3018 says that feed A and feed B no longer agree. In GM's 2025 body control module tables (25OBDG04B, 25OBDG03B) the two measured voltages are compared while a battery is detected and the starter is not engaged; a gap above 4 V in 4 s of a 5 s window fails the test, Type B. GM's electric brake booster in the 2016 and 2018 hybrid tables checks battery supply against the module's own supply instead and fails at a difference above 7 V within 0.01 s, Type A, because the booster's master switch needs a firm supply. In practice one feed is usually dead: GM's PIT5869/PIT5869A for 2021–2024 Tahoe, Suburban, Yukon and Escalade pair U3018 with U3505 and warm A/C when a shorted console lamp wire blows fuse F4DR of the second BCM feed.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number– / 18

Possible causes

  • Blown fuse on one of the two feeds, often from a short on a load circuit sharing it high
  • High resistance or loose terminal in one feed wire medium
  • Weak battery causing uneven voltage drops between feeds low
  • Faulty voltage measurement inside the module low

Symptoms

  • Service engine soon lamp or system warning, depending on the module
  • Functions on the dead feed stop working, e.g. A/C blowing warm
  • Logged together with a low-voltage code for feed A or B

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U3018

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication