OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3016

Control Module Ground D

U3016 closes the ground series and stands for a fourth return path, D, that the module considers open or out of line with its other grounds. Four grounds on one unit are rare, so before chasing the D pin it pays to check whether grounds A to C are logged as well; several ground codes at once point to a shared splice, the battery negative cable or a body-to-engine strap rather than to one wire. No manufacturer publishes a definition for U3016. GM's ratio check for two brake module grounds (19OBDG03B) and Ford's bulletin 26-2150, which assigns grounds A and B of a steering module to different bolts, show that each letter means a real, separate fastening point. CARB expects electrical faults of such components to be caught by continuous circuit checks.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number– / 16

Possible causes

  • Poor shared ground, battery negative or engine-to-body strap high
  • Corroded or loose eyelet at ground point D medium
  • Damaged ground pin or water in the module connector medium
  • Fault in the module's own ground monitoring low

Symptoms

  • Warning or service message for the affected system
  • Several ground or supply codes logged at the same time
  • Intermittent loss of the module's function

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U3016

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication