OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U300B

Ignition Input Accessory/On/Start

Judging by its name, U300B concerns the ignition line that should carry voltage in Accessory, On and Start, i.e. in every key position except Off. A module sets it when the level on that wire contradicts the power mode it has been told or sees on its other inputs, for example live with the vehicle off, or dead while the bus reports run. No manufacturer documents U300B publicly. GM's 2012 pickup wiring manual shows the principle: the body control module reads several discrete switch circuits, decides on the power mode and broadcasts it, and modules with their own switched inputs may fall back to a default mode when that message disagrees with their own pins. GM also shows that such lines are cut differently, e.g. its accessory feed drops out while cranking, which this input type should not do.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number– / 0B

Possible causes

  • Blown fuse or faulty relay in the switched feed to this input medium
  • Input wire open, shorted or backfed from another circuit medium
  • Worn ignition switch contact for this position group medium
  • Body control module sending a wrong power mode on the bus low

Symptoms

  • Functions on the accessory and run feed missing or behaving oddly
  • Affected module running in a fallback mode with a warning

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U300B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication