OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic or reserved

U3005

Retained Accessory Power

U3005 relates to retained accessory power (RAP), which keeps radio, windows or sunroof alive for a while after the key is switched off. GM's truck manual explains the logic: the body module holds its internal RAP relay for about ten minutes after key-off, and ends RAP early when a door opens or battery voltage sinks below a calibrated limit; some modules get the RAP state as a bus message instead. No manufacturer documents U3005 itself publicly, so the code most likely flags a RAP output or message that does not follow these rules. GM's PIE0724 for 2022 Silverado, Sierra and Envision shows the typical consequence of a RAP fault: radio still on afterwards and a dead battery, checked with a parasitic draw test against 50 mA. Not emission-related, no MIL.

SystemNetwork
Typegeneric or reserved
GroupU3
Range / number– / 05

Possible causes

  • RAP relay or output stage staying on or not switching on medium
  • Faulty door switch signal, so RAP is not ended on door opening medium
  • Body module or radio software handling the RAP state wrongly medium
  • Wiring fault or add-on device back-feeding the accessory circuit low

Symptoms

  • Radio, windows or sunroof working long after key-off or not at all after key-off
  • High parasitic drain and flat battery

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U3005

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication