OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0901

Invalid Data from Ion Sense Module

An ion sense module evaluates the tiny current that the burning mixture conducts between the plug electrodes after ignition for the engine controller, which uses it to spot misfire, knock and poor combustion; Ford's patent US20170030322A1 places such a module in the ignition system. U0901 means the module's messages still arrive but their content is rejected – a value out of range, an implausible signal or a wrong checksum or counter. No manufacturer documents U0901 publicly. Stellantis' 3.0 L Hurricane six runs a networked ion sense system: its bulletins name U0673 (module silent) and P2F64 (ion sense feedback circuit A), both cured by PCM software. Saab's Trionic T8 module still fed knock and combustion pulses to the controller over separate wires. With bad ion data, misfire and knock detection lose their basis.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number9 / 01

Possible causes

  • Software of the engine controller or ion sense module (update available) high
  • Disturbed data line, for example from ignition interference or a poor ground medium
  • Ion sense module internally faulty low

Symptoms

  • Check engine light
  • Possibly reduced power from knock protection
  • Misfire or ion sense codes stored alongside

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0901

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication