OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U069F

Lost Communication With Exhaust Pressure Sensor C

Exhaust pressure sensor C is a third pressure measuring point in the exhaust; where it sits is up to the manufacturer, for example behind the turbine or on a second exhaust branch. U069F: this digital sensor, typically a SENT device, no longer supplies usable frames. No manufacturer documents U069F publicly. The nearest documented case is sensor A on Ford's 2023 diesels (6.7 L, 3.0 L): Ford stores U0691 for a transmission error or data gap, a signal wire pinned at one level, or a self-reported sensor fault, watched continuously over 5 s. Letters differ between makers, so these limits are not transferable. CARB requires a coded digital input that falls silent to have a code of its own. Wired analog versions of sensor C report P2E54 to P2E57. Expect the MIL and substitute values for boost or EGR control.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 9F

Possible causes

  • Signal, supply or ground wire of sensor C damaged by exhaust heat high
  • Sensor C reports an internal fault or stops sending medium
  • Moisture or corrosion in the sensor connector low

Symptoms

  • Check engine light
  • Possibly less boost or power
  • Pressure value missing or frozen in live data

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U069F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication