U069E
Lost Communication With Coolant Heater A
Coolant heater A is an electric heater with its own control electronics that warms coolant for the cabin and, in some designs, for the traction battery – usually a high-voltage PTC unit in hybrids and EVs. The vehicle commands it over a data link, mostly LIN: DBK's 400 V heater is driven via LIN 2.0 plus a PWM input, and Webasto's 800 V range adds CAN on its larger models. U069E is stored when the commanding module stops getting answers from the heater. No manufacturer documents U069E publicly. The 2013–2014 Chevrolet Volt shows the layout with a separate coolant heater control module; GM diagnosed it with its own code B101D (PIC5943), and heat returned once the engine ran. Circuit and internal faults of this heater are P2B72–P2B75 and P2DA4–P2DA7. The driver mainly notices little or no heat in electric mode.
Possible causes
- LIN or CAN line to the heater broken, shorted or connector loose high
- 12 V supply or ground of the heater electronics missing medium
- Control electronics inside the heater failed medium
- Heater or master module software fault low
Symptoms
- Little or no cabin heat in electric mode
- Engine starts more often in cold weather to supply heat (hybrids)
- Slow battery warm-up or reduced charging power in frost, where the heater serves the battery
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U069E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.