OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U069C

Lost Communication With Exhaust Gas Temperature Sensor Bank 2 Sensor 3

U069C refers to the third temperature probe in the bank 2 exhaust path, so it can only occur where each cylinder bank feeds its own aftertreatment line, as on some V engines. Such a probe is a digital unit that reports its reading as SENT or CAN frames; the code is stored when those frames stop or keep failing their checks. No manufacturer documents U069C publicly. GM's 2025 diesels have one bank and test only the bank 1 positions, declaring a probe lost after 19 bad samples within 25 and rating it Type A. Bentley's V8 bulletin 2065698/1 proves that digital bank 2 probes are in use, yet names only the first position (U0621). An analog probe at this spot reports through P2466 to P246A, and the fourth probe on bank 2 has U069D. The MIL and a postponed filter regeneration are the likely consequences.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 9C

Possible causes

  • Sensor harness on the bank 2 exhaust side chafed or heat-damaged high
  • Electronics box of the probe failed medium
  • Probe has lost its supply or ground medium
  • Connector corroded or not latched low

Symptoms

  • Check engine light
  • Filter regeneration on bank 2 postponed or blocked
  • Probe shows no value in live data

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U069C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication