U069B
Lost Communication With Exhaust Gas Temperature Sensor Bank 1 Sensor 4
Sensor 4 is the fourth temperature point along the bank 1 exhaust. Of GM's 2025 diesel tables only 25OBDG04A contains U069A's partner U069B; 25OBDG04B ends at sensor 3. The logic is the same SENT check as for sensor 3, 19 bad samples of 25 at 100 ms after the sensor's start-up delay, Type A. What differs is the role: in the second stage of GM's hydrocarbon dosing control (P144E) EGT 4 supplies the temperature ahead of the filter, so losing it disturbs regeneration. GM rates an open or high circuit on this probe (P2471) as Type A. Ford's 2023 diesels read sensor 4 as an analog probe (P2470/P2471) and check it against the other sensors after a cold start (P246F). Sensience offers such probes with SENT or CAN output.
Possible causes
- Harness to sensor 4 damaged by heat during regeneration high
- Sensor electronics failed medium
- Connector corroded low
Symptoms
- Check engine light
- Regeneration interrupted or not started
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U069B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.