U0697
Lost Communication With Particulate Filter Pressure Sensor D
Sensor D is the fourth filter pressure slot and appears only in Ford's 2024 gasoline OBD summary, which watches particulate filters on both banks (P226D and P226E for a missing substrate). There U0697 sits with P2CEA in the circuit and lost-communication check for SENT-type pressure sensors A to D: it runs all the time and needs 5 s to log a fault. Ford keeps a separate functional check (P2CEB) and, for analog parts, low and high limits of 0.3 and 4.73 V. GM's 2025 diesel tables go no further than C. A missing D reading leaves the filter it serves without a measured pressure drop, so soot load and the missing-substrate test fall back on models or wait. U0696 refers to sensor C, U0601 and U0602 to A and B.
Possible causes
- Wiring to filter pressure sensor D damaged high
- Sensor D stopped transmitting medium
- Connector corroded or unlatched medium
Symptoms
- Check engine light
- Particulate filter monitor for one bank incomplete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0697
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.