OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0696

Lost Communication With Particulate Filter Pressure Sensor C

In GM's 2025 diesel tables 25OBDG04A and 25OBDG04B, sensor C is the downstream relative pressure sensor, which reads the gauge pressure behind the particulate filter and carries its own temperature element (lost communication there is U06B6). U0696 is set when the sensor reports message faults above a fixed count or when its newest message is too old, judged as 158 failures in 200 samples at 12.5 ms intervals. Being Type A, it turns on the lamp in the first trip. GM keeps offset errors at standstill (P2CE5) and a frozen signal (P2CE6) apart. Ford's 2024 gasoline summary lists U0696 with P2CE5 for SENT filter pressure sensors, checked continuously with 5 s to register. Without this value, back pressure and filter load are estimated. Sensor D is U0697.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 96

Possible causes

  • Wiring to the downstream pressure sensor damaged by heat or chafing high
  • Internal sensor fault that switches off the SENT output medium
  • Connector corroded by road splash medium

Symptoms

  • Check engine light, on GM diesels in the first trip
  • Particulate filter regeneration based on estimates or delayed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0696

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication