U0695
Lost Communication With Hybrid/EV Battery Pack Coolant Pump B
Pump B is a second pump in the battery thermal circuit; what it serves, for instance a parallel branch or a heater or chiller loop, is up to the manufacturer. U0695 is set when that pump stops answering on its data link. No manufacturer documents this code publicly. The public GM tables show a single battery pump only: the 2016 Volt table 16OBDG01 checks its PWM control line at commands between 5 and 95 %, 40 bad readings within 50, sampled every 100 ms, Type B. Hyundai's campaign T4G shows how such pumps fail on the network, using maker-specific codes for the battery and the motor electronics pumps. Pumps like Bosch's PAD2 take PWM or LIN commands and offer diagnostics. Wired faults of pump B are P0E1A to P0E1E.
Possible causes
- Wiring or connector of pump B damaged or wet high
- Pump B electronics or motor failed medium
- Controlling module or software faulty low
Symptoms
- Battery temperature warning or power limit
- Charging power reduced
- Hybrid/EV system warning
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0695
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.