U0691
Lost Communication With Exhaust Pressure Sensor A
On Ford's 6.7 L and 3.0 L diesels of 2023, exhaust pressure sensor A measures pressure ahead of the turbine and is a SENT device. Ford's diesel OBD summary sets U0691 when the low-level SENT driver sees a communication error or no data within the expected window, when the line is held at one voltage level, or when the sensor reports an internal fault; the check runs continuously and needs 5 s. P0470 is kept for a SENT status error or a raw value above a limit. The same sensor has two plausibility tests: with the engine off it may differ from barometric pressure by no more than 15 kPa (P0471), and while driving it is compared against a model (P0474). Without this pressure, turbo and EGR control lose an input. U0692 covers sensor B.
Possible causes
- SENT line shorted to ground or supply, or open, near the hot turbo high
- Sensor reports an internal error or stops sending medium
- Connector heat-damaged or corroded medium
- Sensor damaged by soot or condensate in the pressure line low
Symptoms
- Check engine light
- Reduced boost or power on some engines
- EGR and turbo running on substitute values
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0691
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.