OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U068F

Lost Communication With EGR Temperature Sensor C

Engines with both a high- and a low-pressure EGR loop need more temperature points, which is where slots C and D come in. U068F means the controller lost the digital messages of EGR temperature sensor C. There is no public manufacturer documentation for it. In GM's 2025 diesel table 25OBDG04B, sensor C is an air temperature point upstream in the low-pressure EGR path, read as a resistance: below 7 ohms it gives P04D0 after 30 of 38 counts, Type A, and after more than 8 hours off it may not stray over 20 °C from the mean of intake air and fuel temperature at key-on (P04CF). A SENT version with its own lost-communication check is not listed there. CARB requires separate detection when a digital input is silent. Analog faults are P04CE to P04D2. Low-pressure EGR is then usually reduced or switched off.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 8F

Possible causes

  • Wiring to sensor C near the exhaust aftertreatment damaged high
  • Connector corroded by road splash medium
  • Sensor electronics failed medium

Symptoms

  • Check engine light
  • Low-pressure EGR reduced or disabled

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U068F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication