OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U068B

Lost Communication With Turbocharger/Supercharger Inlet Pressure Sensor A

The inlet pressure sensor sits between air filter and compressor. Its reading shows filter restriction and, together with boost pressure, the pressure ratio the compressor works against. Ford's 2023 diesel summary connects sensor A via SENT and lists U068B in its SENT sensor group: U068B follows when the low-level SENT driver sees the signal line pinned to one voltage level, either up or down, monitored without pause and judged over 5 s. A sensor that still talks but raises its own error flag or reports data above a threshold sets P012A instead. Combined pressure and temperature chips such as Infineon's KP276 deliver this kind of SENT signal. U068C is the code for a second inlet sensor. Without the value the controller estimates inlet pressure, and boost or filter monitoring become less precise.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 8B

Possible causes

  • SENT signal wire shorted to ground or voltage, or open high
  • Connector on the intake duct loose, oily or corroded medium
  • Inlet pressure sensor failed medium

Symptoms

  • Check engine light
  • Air filter restriction no longer monitored
  • Possibly somewhat reduced boost

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for U068B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication